Breezaire WKSL Series

The split design of the BREEZAIRE WKSL Series cooling units combine flexibility and easy installation to provide ideal storage conditions for your wine cellar. The WKSL Series feature a digital electronic (Sentry III) thermostat. This contributes to the additional safety and convenience features such as the large and easy to read, green LED display. Take note that this model also sports accurate, readable set points. This allows for continuous reading of enclosure temperature or displaying of the set point when changing enclosure temperatures. Plus, you won't need tools as it is conveniently designed for easy adjustments. "This is the big advantage of the BREEZAIRE WKSL Series as it offers the flexibility that our self-contained series cannot deliver." Other features include the power outage protection, which delays unit start up after power outages. The series is also equipped with locked airflow protection. This shuts down the unit and protects wine in case of high temperatures caused by condenser blockage.


The WKSL series uses the Sentry III+ digital control system for complete control of the enclosure conditions. The units are specifically designed to provide a constant, selectable temperature between 48F and 63F. It is, of course, essential that the unit is installed in a properly constructed enclosure. It also reduces excess relative humidity to the proper 50% to 75%. Basically, the BREEZEAIRE WKSL Series is designed to lower the temperature, while removing only excessive moisture. This process can raise the relative humidity levels, particularly in a properly constructed enclosure. It also bears noting that the WKSL units do not include a heating system. They will not warm the enclosure as the were not designed to cool service cabinets, which are maintained at lower temperatures and opened or entered frequently.


While WKSL Series systems are designed for easy installation, it is highly recommended that this should be performed by a properly equipped and qualified air conditioning or refrigeration service technician. A unit contains two copper tubes. Low voltage wiring that connects the two modules and power is hard wired to the unit using adequately sized 110 AC volt electrical sources. Please keep in mind that these systems must be charged with refrigerant during installation.


Sizing Guide & Specifications for Breezaire WKSL Systems
    Enclosure Volume in cubic feet Electrical depth width height weight  
WKSL2 Fan/Coil 265 cu. ft. 1 Amp 7.75" 14.25" 14.125" 25 lbs
Condenser 4 Amps 11" 14.25" 14.125" 35 lbs
WKSL4 Fan/Coil 1000 cu. ft. 1.5 Amp 12.375" 14.25" 19.75" 45 lbs
Condenser 7.5 Amps 12.375" 14.25" 19.75" 55 lbs

Note: All units are 115 Volt, 60 Hz
Breezaire Refrigeration

265 cu. ft.
Breezaire Refrigeration

1000 cu. ft.