The Winemaker Series individual bottle wine rack kit with display row option and lower diamond bin is sold to be compatible with the WineMaker Archway & Table Top option, or the Vintner Glass Rack and Table Top Option. We think you will enjoy this wine racking module that consists of all the above and below individual wine bottle racking for the unit as pictured. Please note that there is only an 8 Ft & a 7 Ft Option available for this unit. The 8 Ft Option is compatible with stacking double 4 Ft Options, and the 7 Ft Option is compatible with stacking 4Ft Options on the bottom, and 3Ft Options above. Archway & Table Top, & Glass Rack and Table Top kits sold separately. All Winemaker wine racks must be mounted 1 1/2" off the wall to ensure proper wine bottle stability, and will therefore add 1 /1/2" to the listed dimensions. Moldings and platforms sold separately. Assembly required.
- Racking must be assembled 1 1/2" from the wall
- Versatile wine racking
- Can accommodate just about any ceiling height
- Custom, organized look at affordable prices
- Many racking styles and display options
- Made in the USA
||Utilize this platform specifically designed and engineered to elevate each wine rack kit. You must also purchase this special platform in order to use the 5 1/4" base molding package. This platform can support one wine rack, or two stacked. The platform is 3 13/16" High, and will allow you to maximize the rack height in any room. Please note : If you order the platform stained, only the top will be stained, as majority of customers will be attaching base molding to the front of the platform. If you would like the front or the side of the platform to be stained, you should order a half pint of stain from us to touch it up. Please call to order stain. Additional cost applies. Platforms are available for purchase here.
KIT SERIES UPGRADES
Spacer bars come with a dado that comfortably fits each column of your racking. Putting together the racks can be done with the nails provided, or you can utilize a brad nailer for faster assembly. Note that if you choose to assemble your racks with screws, you will need to pre-drill and countersink the holes to avoid the accidental splitting of the material.
All the racks in this Series have a 1 7/16" square cut bottom rail. With these rails, your bottles are stored securely above the floor level so they do not break accidentally by hitting a hard floor. Added to this,, the base molding supplied with this Series is 1 7/16" high and can be applied directly to the front of this rail.