Beautiful Wine Cellar Cork Tabletops

buy now



  • Cork tabletops under 8' long by 35 15/16" deep or less will ship out with cellar.
  • Oversized Cork table tops will drop ship separately to customer and inside delivery is not available.
  • Cork tabletops will have the same nosing as our regular tops do.
  • Maximum size top that we can ship pre-assembled is 8’ long or 35 15/16” deep or less.
  • For example, a top that is only 3' L but is 4' deep, has to be quoted as oversized.
  • If the top dims exceed 8’ long or 35 15/16” deep, then the materials will be shipped loose and installed onsite.
  • The total thickness of the cork table top will be 1-5/32” for tops made from Roca, Cuero, or Pedras. This accounts for the 13/32” thickness of the cork plus the ¾” plywood backer.
  • These cork boards will also work for the cash stands. The height will be in range for ADA compliance. The finished cash-stand tops will be 36” high, which is the max allowance for ADA.
  • Lead-time for a Cork tabletop is 10-12 weeks.
  • Please note that once all custom art pieces are finalized, they may not be returned.
CORK tongue and groove CLIC floating floor for commercial and residential applications.
Roca, Cuero & Pedras 35 13/16” x 11 13/16” x 13/32” (2.7mm - 7/64” wear layer)
Top Layer:
High density cork wear layer, with densities of 28 pounds per cubic feet. A higher density wears better, dents less and will remain more stable after installation.
Middle Layer:
6mm (1/4”) exterior grade fiberboard does not contain any added formaldehyde and offers higher resistance to moisture.
Bottom Layer:
3mm (1/8”) cork underlayment.
5 coats UV-cured acrylic finish, specially formulated to flex with the cork under pressure.
None added.
Glueless locking, Unilin CLIC system, Floating floor is offered with the latest technological advancements to optimize the performance of the installation. For installation in basements it is recommended that you install the floating floor over a moisture barrier 6 mil film of polyethylene.
Regular maintenance requires only routine sweeping and vacuuming to avoid build up of abrasive particles. Spills should be cleaned up right away. Use only cleaners specified for use on pre-finished hardwood available from your local retailer or home center. Wet maintenance is entirely forbidden. Well maintained cork flooring will last for decades of enjoyment.
Lead time:
10-12 weeks after sign off. Drop shipped directly to customer. Inside delivery is not available.
The cork and accessory products for installation are drop shipped to the customer. Once all cork orders are finalized, they may not be returned.


“JointShield™” - a moisture protection system applied at production to the edges of the floor panels. With “JointShield™” technology, your cork floor will wear better in spite of possible spills and frequent mopping. Permanent protection is done by the factory application of a moisture-repellent agent (paraffin-oil based) to the entire cross-section of the profile. The edges of cork floor panels become completely sealed and watertight.

Microban® & Insect Repellent- Anti-microbal and is resistant to mold and mildew. Subherin, an inherent substance of cork is a natural insect repellent which will even keep the termites away.

Wear Top - Wear Enhancing Abrasion Resistance Finish will increase wear and scratch resistance while not compromising flexibility. This finish also meets European Environmental regulations.

Fire Resistant - Cork is a fire inhibitor that does not spread flame. Cork will not produce toxic gases on combustion.

Thermally and Acoustically Insulated - Cork contains over 100 million prism- shaped cells per cubic inch. These air filled cells allow cork to provide excellent thermal and acoustic insulation.

Resilience - The inherent resiliency of cork provides a comfortable cushion that is gentle on feet, back & joints.



Lead time is 10-12 weeks. The cork and accessory products for installation are drop shipped to the customer and inside delivery is not available.


Cellar Art "Tabletops" include Vintage Wine Barrel, Mosaic, Tile, Corian, Tumbled Stone, and Cork. All Cellar Art Tabletops are manufactured per customer for their specific usage. As a result of the custom nature of the products, these items cannot be placed back into inventory to be used for another customer. Therefore, there is no return of Cellar Art Tabletops for any reason. Once the Purchase Agreement is signed your order will be placed into production. If your tabletop needs to be modified after the agreement is signed you will be charged a redesign fee, an artist's labor fee, if applicable, plus the cost of any materials that have been used in the production of the tabletop. If you would like to cancel your order before it is shipped, you will only be refunded the amount after the design fee, labor fees, and any materials that have already been used for your tabletop have been subtracted from your original payment. In the event that the amount of used materials and labor fees exceed the deposit on hand, the Purchaser agrees to pay Wine Cellar Innovations the remainder due to cover the costs of labor and said materials. Purchaser will have the option to have the finished materials they are being charged for shipped to the address of their choice at their expense or simply request Wine Cellar Innovations to discard the material for no additional charge to Purchaser.