Every wine bottle has a special spot in this two column individual bottle wine rack. This wine rack also has a built in display row that pops out due to it's short depth and is very attractive. Purchase two to stack on top of each other to maximize the height of your wine storage. All Winemaker wine racks must be mounted 1 1/2" off the wall to ensure proper wine bottle stability, and will therefore add 1 /1/2" to the listed dimensions. Moldings and platforms sold separately. Assembly required.
- Versatile wine racking
- Racking must be assembled 1 1/2" from the wall
- Can accommodate just about any ceiling height
- Custom, organized look at affordable prices
- Many racking styles and display options
- Made in the USA
Utilize this platform specifically designed and engineered to elevate each wine rack kit. You must also purchase this special platform in order to use the 5 1/4" base molding package. This platform can support one wine rack, or two stacked. The platform is 3 13/16" High, and will allow you to maximize the rack height in any room. Please note : If you order the platform stained, only the top will be stained, as majority of customers will be attaching base molding to the front of the platform. If you would like the front or the side of the platform to be stained, you should order a half pint of stain from us to touch it up. Please call to order stain. Additional cost applies. Platforms are available for purchase here.
KIT SERIES UPGRADES
Stacking & Center Trim - Our stackable Vintner/WMK line is sold in 3 and 4 foot sizes, which makes stacking up to your ceiling height a breeze. When ordering 6, 7, 8, or 9 foot heights, you will be sent multiple 3 & 4 foot racks to assemble and stack yourself. Be sure to watch our assembly videos for the best way to put them together. When stacking to a greater heights, you may wish to purchase center trim, which will cover the space where the specific racks meet.
- 6 Foot Racking = Two 3 foot racks
- 7 Foot Racking = One 3 foot rack, and one 4 foot rack
- 8 Foot Racking = Two 4 foot racks
- 9 Foot Racking = Three 3 foot racks
Spacer Bars:
Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a handy brad nailer for faster assembly. A third option is using screws, if you prefer that method. You will need to predrill and countersink the holes to ensure you do not split the material.
Bottom Rail: All the racks in this Series have a 1 7/16" square cut bottom rail. These rails make it so your bottles are stored securely above the floor level so they would not break accidentally by hitting a hard floor. Added to this, the base molding supplied with this Series is 1 7/16" high and can be applied directly to the front of this rail.