Low Profile IC Can Lighting

Adjustable Gimbal Ring:

• Available in 3 finishes: Polished Brass, Chrome & Satin.
• Holds up to a maximum 50 watt, MR-16 bulb.
• 3 5/8” Diameter, 2” deep.
• The trim can be regressed or out-gressed for a 35 degree tilt.
• Can take up to 2 optical accessories.
• Aluminum die-cast construction with a polished brass finish.
• Internal gasket prevents 100% of all light leakage. 2” Miniature Low Voltage Noise Free IC Housing:
• A light that can be used for both ceiling and soffit applications.
• Designed for New Construction, to be used in conjunction with insulation.
• These can be used for Remodel Construction as long as they have the ability to run the proper electrical and have access to the ceiling joists.
• 5 ½” height allows for use in joist construction.
• Small aperture, low voltage specification grade housing.
• Integral low voltage electronic transformer to prolong lamp life and increase lighting quality.
• Thermally protected IC rated Housing.
• Designed for accent and task lighting applications.
• Pre-installed adjustable bar hanger.
• The housing unit can be installed between or below joists.
• For below-joist installation, it may be necessary to drop the ceiling – If the ceiling does indeed need to be dropped, it MUST BE NOTED on the Design Request Form!
• 4 ½” KO’s on junction box.

Cellar “Lighting” includes IC Can Ceiling lights, Halogen Recessed lights, LED lights and Fluorescent Slimlites. Missing Parts Upon receipt of your lighting you will have up to 3 weeks to review the shipment and inventory all of the parts. If you note any missing parts you can contact your design consultant and request a free replacement. If you contact us after 3 weeks, but before the end of the 4 weeks from delivery of your lights, you will be charged 15% of the cost of that replacement part. If you contact us after 4 weeks, but before 6 weeks you will be charged 25% of the cost of that replacement part. Any requests after 6 weeks and you will be charged the full amount for the replacement item. Dysfunctional Lights If, upon installation of the lights, they are not working properly, you must check all connections, polarities, and outlets, prior to requesting a replacement. If the issue is with LED lights, then you must exhaust all suggestions on the LED Installation Trouble Shooting Guide, prior to requesting a replacement. You can contact your design consultant and request a free replacement. Return Policy Upon receipt of your lighting you will have 6 weeks to review the shipment and inventory all of the parts. If you note any missing parts you can contact your design consultant and request a free replacement. If you contact us after 6 weeks you will be charged 50% of the cost of that replacement part. Any requests submitted after 12 weeks you will be charged the full amount for the replacement item. If you need to return your lighting for any reason other than missing on dysfunctional parts, you may do so within 30 days upon receipt of the order. You can return the lights and corresponding parts, in a like new condition, for a 15% restocking fee and the original shipping charges out, plus the return shipping charges. The products must be returned in the original shipping container they were sent out in. Any damaged parts that are not caused due to shipping damages will be deducted from your refund as well, whether the damage was caused by you or the person installing the lighting on your behalf. If there is shipping damage due to insufficient packaging that was provided by you, that amount will be deducted as well. All items must be returned in the original packaging with all parts intact. You must call your design consultant and request an RMA (Return Merchandise Authorization) number before returning your unit.

Free Design Services

Does your home have that spare room or unused space that you would like to transform into a wine cellar, wine storage area, or wine room?

You can stop dreaming about that custom wine cellar and start clicking on the design request form! All you need to do is share your room dimensions with us, along with some other valuable information pertaining to your wine storage needs. We will then get to work and provide you with a wine storage plan layout - totally for free.

Wine Cellar Innovations can whip up a custom design for that spare room or area in your home by utilizing our wood wine rack kits and/or our custom products. We'll take into account your budget, bottle storage needs, and other considerations for your wine cellar layout.

The average lead time is 4 weeks. If you are also ordering wine racking, we will attempt to ship out your lighting with your wine racking shipment.