Redesigned Wine Rack Kit Styles

Changes in manufacturing process have been made to the following wine rack kits effective 4/14/2014:*

Designer Series Kit Line:
Half Height with Display (DKS-HHDIS)
Half Height (DKS-HH)
Rectangular Bin & Case Storage for Below Tabletop (DKS-RBWS)
Rectangular Bin & Case Storage (DKS-RECT)
Waterfall Display Right (DKS-WATER-R)
Waterfall Display Left (DKS-WATER-L)
Waterfall Display (DKS-WATER)
Wood Case Storage Tasting Table (DKS-CASE)
1 Column Individuals (DKS-1COL)
2,3,4,5 Column Individuals (DKS-2 through 5COL)
1 Column Individual with Display (DKS-1COLDS)
2,3,4,5 Column Individual with Display (DKS-2 through 5COLDS)
1 Column Magnum (DKS-MAG)
Open Diamond Bin (DKS-ODIAM)
Open Diamond Cube (DKS-ODC)

Vintner Series Kit Line - 3 & 4 Ft high:
1 Column Rectangular Bin (VIN-RECT1)
3 Column Rectangular Bin (VIN-RECT3)
Waterfall Display 1 (VIN-WATER1-R & L)
Waterfall Display2 (VIN-WATER2-R&L)
Waterfall Display 3 (VIN-WATER3 - R & L)
1, 2,3,4,5 Column Individuals (VIN-1 through 5COL)
1, 2,3,4,5 Column Individual with Display (VIN-1 through 5COLDS)
1 Column Magnum (VIN-MAG)
Open Diamond Bin (VIN-ODIAM)
Open Diamond Cube (VIN-ODC)
Open Vertical Display (VIN-OVD)
Tasting Centers (VIN-INDGT)

WineMaker Series Kit Line - 3 & 4 Ft high:
1 Column Rectangular Bin (VIN-RECT1)
3 Column Rectangular Bin (VIN-RECT3)
Waterfall Display 1 (VIN-WATER1-R & L)
Waterfall Display2 (VIN-WATER2-R&L)
Waterfall Display 3 (VIN-WATER3 - R & L)
1, 2,3,4,5 Column Individuals (VIN-1 through 5COL)
1, 2,3,4,5 Column Individual with Display (VIN-1 through 5COLDS)
1 Column Magnum (VIN-MAG)
Open Diamond Bin (VIN-ODIAM)
Open Diamond Cube (VIN-ODC)
Open Vertical Display (VIN-OVD)
Tasting Centers (VIN-INDGT)

Traditional Series Kit Line:
Half Height (TR-HH)
Rectangular Bin & Case Storage for Below Tabletop (TR-RBWS)
Rectangular Bin & Case Storage (TR-RECT)
1 Column Individuals (TR-1COL)
2,3,4,5 Column Individuals (TR-2 through 5COL)
1 Column Individual with Display (TR-1COLDS)
2,3,4,5 Column Individual with Display (TR-2 through 5COLDS)
1 Column Magnum (TR-MAG)
Open Diamond Bin (TR-ODIAM)
Open Diamond Cube (TR-ODC)

*specs are updated on product pages

1) Customers have requested we make the racks more sturdy before attaching the product to the wall. Therefore we are going to be providing a back brace with all of the kits attached in this e-mail. Once installed it significantly reduces the sway from side-to-side of the racks.

2) The other change was to make the installation of the trim easier. Clients wanted to be able to assemble the kits and attach the molding to a 1x2 front face on the top and bottom, not just the bottom. As a result we now have a 1x2 top.

Unless requested otherwise this is the kit that will be sent out for all orders received 4-14-2014 and beyond. If you want the old style kit as you are ordering an add-on to an existing cellar then you will need to request that at time of order.

Changes in manufacturing process have been made to the following wine rack kits effective 1/14/2009:*

Designer Series Kit Line:
Designer Series Half Height with Display (DKS-HHDIS)
Designer Series Half Height (DKS-HH)
Designer Series Archway (DKS-ARCH)
Designer Series Vertical Display Cabinet (DKS-VERT)
Designer Series 108 Bottle Tasting Table (DKS-108TAB)

*specs are updated on product pages

Traditional Redwood Kit Line:
Traditional Redwood Individual Half Height (R66)
Traditional Redwood Solid Diamond Cube (RSDC)

Country Pine Kit Line:
Country Pine Individual Half height (CP66)
Country Pine Solid Diamond Cube (CPSDC)

How things were
	Line up an Individual Bottle Rack and and Open Diamond Cube with the old style and the vertical height of the spacer bar was different.

Why did we change it?
We changed this product because you asked for it. We received much positive feedback in the past about this product line. However, we never want to be satisfied with good, when we can attain something that is great. Therefore, we have been asking for feedback on anything we could change to make this product line better and the changes noted on this page are a culmination of the feedback we received.

What if I have the old style racks and I want to place an order that matches what I already have?
You can still place an order for the old style kits. It is best to call in the order and speak with a design consultant to ensure they pull up your previous order and reference that order when placing the new order to ensure the product line is a match.

How they are now
	The solution was to change the design of the kits to allow for a 1 7/16" square cut base to be applied to the front of all the Designer Series wine racks.

This modification to the product line, while it seems simple, will allow for a multitude of other positive changes to this product line, which are as follows:

When you order a base option there will no longer be a need to stack two sets of 1x2 under the rack to allow for the moldings to be attached.
The base height is now 1 7/16" height. Instead of 2 1/16". If you order the base molding you will install that instead of the 1 7/16" square cut base on the kits.
This new height ensures that all stored wine bottles for all the Designer Series wine racks will be elevated off the floor.

Redesigned Wine Rack Kit Styles

Wine Cellar Supplies

Wine Racks & Cabinets

Storage & Ideas