Winezone Split Air Handler System Diagram for a Wine Cellar
|
| The Winezone Split Air Handler is located outside the wine cellar and the supply and return air is ducted to and from the wine cellar. This wine refrigeration unit looks like a central air-conditioning system and is just as quiet. It comes equipped with electronic controls and digital displays. Options available with these units are humidifiers, dehumidifiers and alarm modules. Properly equipped with the above options, the Winezone Split Air Handler System gives you total control of your wine cellar refrigeration. |
 |
| Heat Loads are based on the following conditions:
|
- R-13 in all walls
- R-19 in ceiling
- Vapor barrier on all walls and ceiling
- Concrete slab floor is sealed
- Space above wine cellar is conditioned
- Rectangular room
- 3 above grade exterior walls
|
- 1 interior wall
- 1.5 watts of light per square foot
- Residential Application
- 8' ceiling height
- 20 square feet of glass in interior wall
- Square room rounded down to nearest whole foot
|
If your wine cellar does not meet these specifications, please request a heat load calculation be done for your space. |
SPLIT AIR OPTIONS
|
Wine Cellar Refrigeration Condensers
| Indoor |
Outdoor |
 |
 |
| Both the indoor and outdoor wine cellar refrigeration condensers work with the split air handler system. |
|
|
| Sound Blankets for Compressors |
| For those who are concerned about noise levels, Sound Blankets for compressors can be purchased for an additional charge. |
|
|
|
| Coated Evaporator Coil |
| Coated evaporator coils are recommended for those with exposure to corrosive environments such as saltwater. |
|
|
|
| Wood Supply and Return Registers |
| Wood supply and return registers are also available. |
|
|
| |
| |
