Winezone Split Refrigeration System Diagram for a Wine Cellar
Our industrial quality Winezone Split Refrigeration systems are ideal for any wine cellar. Split Refrigeration systems are available in sizes from 1,500 BTU and larger and are built to last under the most demanding conditions.
* Installation by qualified HVAC technician is required.
- Featured wine cellar refrigeration evaporator is quiet
and attractive.
- Designed for a 55 degree temperature differential for
wine storage.
- Designed to maintain 55 - 75% relative humidity in wine
cellars.
- Other evaporator options are available but
not shown.
- FREE BTU Analysis.
| Heat Loads are based on the following conditions:
|
- R-13 in all walls
- R-19 in ceiling
- Vapor barrier on all walls and ceiling
- Concrete slab floor is sealed
- Space above wine cellar is conditioned
- Rectangular room
- 3 above grade exterior walls
|
- 1 interior wall
- 1.5 watts of light per square foot
- Residential Application
- 8' ceiling height
- 20 square feet of glass in interior wall
- Square room rounded down to nearest whole foot
|
If your wine cellar does not meet these specifications, please request a heat load calculation be done for your space.
|
|
SPLIT REFRIGERATION OPTIONS |
|
Wine Cellar Refrigeration Condensers
| Indoor |
Outdoor |
 |
 |
Both the indoor and outdoor wine cellar refrigeration condensers work with the wall mounted evaporator.
Water-cooled condensers are available. |
|
|
| Sound Blankets for Compressors |
| For those who are concerned about noise levels, Sound Blankets for compressors can be purchased for an additional charge. |
|
|
|
| Coated Evaporator Coil |
| Coated evaporator coils are recommended for those with exposure to corrosive environments such as saltwater. |
|
|
