Wine Cellar Innovations: Wine Cellar Ladders, Wine Cellar Rolling Ladders

Specifications
LADDER TRACK LADDER HOOKS LADDER WHEELS	LADDER
	Our standard rolling ladders come in Red Oak with a clear finish.
	Wood options such as Birch, Cherry, Maple, Mahogany, White Oak, Lyptus, Alder, and Walnut are available for a slight upcharge.
	Also for a slight upcharge, ladders can be stained or painted to match your racking.
	Ladders cannot be lacquered.
	The ladders come with upper hook assembly.
	Custom made to fulfill your specific needs and environment.
	The reinforced bottom step gives added safety and support.
	Maximum height available is 14ft.
	The average lead-time for a standard ladder is 6 to 8 weeks.
	Each ladder is a custom creation and may not be returned. return/cancellation policy
	LADDER TRACK
	Open seam metal track with a flat black powder finish.
	Other metallic hardware finishes are available for a slight up charge.
	The tracks are easy to install and can be designed to fit unusual floor plans.
	NOTE: Extra support may be needed for ladder track applied to diamond bins.
	Ladder track will be placed TWO bottle spaces above or below any spacer bar.
	ROLLER ASSEMBLY
	The bottom roller assembly has a sunburst pattern, cast wheel cover.
	The no-scuff wheels travel equally well on wood, tile or carpeted floors.
	Our ladders give you a stylish way to easily and safely utilize all of your out of reach storage locations.
	A cellar with an inside corner transition usually has a tight radius. This feature doesn’t allow ladders with upper wheel assemblies to function effectively.
	The upper hook assembly allows for quick and convenient ladder placement in all locations of your wine cellar. Just push the base of the ladder towards the racking until the hooks clear the ladder track and roll the ladder to a new location.
	LADDER FOOTPRINT
	Ladder Footprints: “footprints” are the amount of space that the ladder comes out from the racking/mounting surface.
	Straight Ladder: 7’ = 20 3/8” 8’ = 22 7/16” 9’ = 24 9/16” 10’ = 26 11/16” 140” (11.66’) = 30 3/16”
	Bent Ladder (36” h tabletop): 7’ = 20 7/8” 8’ = 22 7/8 ” 9’ = 24 7/8 ” 10’ = 26 7/8 ”
	Tapered Ladder rails start at 13 ¼” width at the top and taper out to the bottom.
	Parallel ladder rails are available, but you must specifically request that on the order form. Parallel ladders are 18” wide.


	back to top