CORK is a durable and easy to maintain flooring option.
Pre-finished CORK flooring is protected with 5 coats of durable UV cured acrylic finish. Regular maintenance requires only routine sweeping and vacuuming to avoid build up of abrasive particles. Spills should be cleaned up right away. Use only cleaners specified for use on pre-finished hardwood available from your local retailer or home center. Wet maintenance is entirely forbidden. Your well maintained cork floor will last for decades of enjoyment.

For installation in basements it is recommended that you install the floating floor over a moisture barrier 6 mil film of polyethylene.

Description: CORK tongue and groove CLIC floating floor for commercial and residential applications.
Size: 35 11/16” x 11 13/16” x ½” (3mm-1/8”)
Top Layer: 3mm (1/8”) high density cork wear layer, with densities of 28 pounds per cubic feet. A higher density wears better, dents less and will remain more stable after installation.
Middle Layer: 6mm (1/4”) exterior grade fiberboard does not contain any added formaldehyde and offers higher resistance to moisture
Bottom Layer: 3mm (1/8”) cork underlayment
Finish: 5 coats UV-cured acrylic finish, specially formulated to flex with the cork under pressure
Formaldehyde: No added formaldehyde
Installation: Glueless locking, Unilin CLIC system, Floating floor is offered with the latest technological advancements to optimize the performance of the installation.

Our cork flooring features:

“JointShield™” - a moisture protection system applied at production to the edges of the floor panels. With “JointShield™” technology, your cork floor will wear better in spite of possible spills and frequent mopping. Permanent protection is done by the factory application of a moisture-repellent agent (paraffin-oil based) to the entire cross-section of the profile. The edges of cork floor panels become completely sealed and watertight.

Microban® & Insect Repellent- Anti-microbal and is resistant to mold and mildew. Subherin, an inherent substance of cork is a natural insect repellent which will even keep the termites away.

Wear Top - Wear Enhancing Abrasion Resistance Finish will increase wear and scratch resistance while not compromising flexibility. This finish also meets European Environmental regulations.

Fire Resistant - Cork is a fire inhibitor that does not spread flame. Cork will not produce toxic gases on combustion.

Thermally and Acoustically Insulated - Cork contains over 100 million prism- shaped cells per cubic inch. These air filled cells allow cork to provide excellent thermal and acoustic insulation. Also, the inherent resiliency of cork provides a comfortable cushion that is gentle on feet, back & joints.

Back to top