| 9. | All finished soffits for radius racking. (See figure 5 below)
(Figure 5)

 |
| 10. | All walls and ceilings must have a 6 mil minimum vapor barrier "on the warm side" of the walls and ceilings. |
| 11. | All walls must be insulated with a minimum of R-13 regardless of existing conditions. |
| 12. | All ceilings must be insulated with a minimum of R-19 regardless of existing conditions. |
| 13. | Ideally, 1/2" plywood sheeting will be secured to all walls after electrical rough in and insulation to anchor racking. (This step not needed if using nailers between studs. See Figure 3 on page 4). |
|
| |

Find out more about our worldwide factory direct installations.

Have more installation questions? Contact our installation manager to get your answers.
|

Print PDF File |