Wine Cellar Innovations: Carved Wood Wine Cellar Doors | Carved Wood Doors | Carved Wooden Doors

Enhance the entryway to your wine cellar with our Designer Collection custom built wine cellar doors.
	Design	The Designer Collection Door line is a series of distinctive handcrafted and engineered doors made in the USA. The portfolio of Designer Doors provides numerous options in design features. With multiple wood choices and a variety of enhancement options, these doors give a special beauty to any home.
	Standard door	Standard doors come in four different frame options and maximum dims of 36”w x 96”h.
	Door Jamb	We have 2 standard jamb sizes, 4 9/16" & 6 9/16", but we can manufacture to any jamb dims needed. The maximum jamb width is 8".
	Door Thickness	We cam build to any thickness, but the standard for this line is 2 1/4".
	Threshold	Doors come standard with a 1 1/8” white oak threshold sealed with finishing oil. They are not stained or lacquered, as normal use will wear them off. The reveal between the door and threshold is ¼”. The ¼” space between the door and threshold is standard on these doors. This, and threshold thickness, should be observed when considering flooring thickness, and the space between the sweep and stone/carpet/throw rugs when the door is active.
	Door Swing	Door is hung per customer requirements.
	Door hardware/handles or latches	• We offer any company/design available on the market, but we do not stock any. If you tell us the manufacturer, the model #, color, and handing you want, then we can get a quote for you. • The cost of hardware/latch is NOT included in the cost of the door. It must be requested separately. • Standard, non-mortise lockset prep is included in the cost.
	Hinges	Hager 4.5” x 4.5” ball bearing hinges. The hinges do not ship attached to the door.
	Door Specs	Doors can be built to any specification with the etching customized to fit your taste.
	Glass	• The glass is tempered and is marked with a “tempered” logo baked onto the right corner, on both sides of the unit. • The thickness of the insulated glass unit is 7/16” or greater, depending on what the design requires. • Clear Glass is the standard but custom textured glass is available upon request and for an up-charge. • Etched Glass is not available on this door line.
	Details	The doors are built using traditional frame and panel construction. The stiles and rails are skinned with a minimum 1/8” thick skin to allow for better finish absorption and durability against nicks and abrasions. Stave Core is used for the Designer Door stiles and rails compared to plywood used by many companies. Interior door panels are made with solid cores, in which we select the wood type that best fits the panel design for stability, and float within the stiles and rails to allow expansion and contraction. Stave Core, an engineered wood product, increases the torsional stability and resistance to bow and warp of the door while retaining the traditional solid wood look and feel. We also have Glacier Core, an engineered foam core product, which we offer for our stile and rails in certain doors applications. This reduces the weight of the door and increases energy and sound insulation.
	Finish Options	See Finish Options
	Lead Time	• 6-8 weeks for standard designs, up to 36”w x 96”h. • Products over 36”w x 96”h and with custom designs, wrought iron or wood carvings will have varying lead times based on the artist’s schedule.
	Shipping	• Due to the door’s weight, we prefer not to ship slabs pre-hung in their jambs. If this will be a problem then we will do our best to meet requests to deliver doors pre-hung. We will pre-machine and pre-hang each door to its jamb to insure the reveal is correct and then we ship the jamb knocked down. • True arch jambs will come intact unless otherwise noted. • The price to ship any flat-top or soft arch jambs intact will be dependent upon the size of the jamb and therefore must be requested at the initial quote stage.
	Price Includes	• Hager 4.5” x 4.5” ball bearing hinges. • Jamb, weather strip & wedges (sealed jamb). • 1 1/8” white oak threshold. • Clear glass ONLY. • Pre-machined exterior jamb SHIPPED KNOCKED DOWN, except on the true arch doors.. • Standard NON-mortise lockset prep (mortise requires an up-charge). • 3- part stain finish on the door & the jamb. This includes a conditioner/sealer coat, one coat pigmented stain, and three coats of lacquer. • 12 clavos included on the Durango & Breckenridge doors. • Metal Grate is included with the Durango Design.
	Return/Cancellation	Return and Cancellation Policy
	Warranty	Limited Warranty
		back to top

Available Wood Types: Superior Alder Reclaimed Fir All Heart Redwood Sappele Mahogany African Ribbon Mahogany Chinese Elm Carving is not available on doors made from Redwood or Reclaimed Fir.

Wood Distressing options: Samples shown on All heart Redwood.	Aged	Aged - Dusty Weathered Barnside
	Aged – a shallow hand hewn ripple on all flat surfaces of the door with some rough tear that adds texture.
Rustic	Primitive - Distressed	Primitive - Dark Weathered Burnt Sienna
Rustic – a medium ripple with lots of tear in the wood. Perfect for the more rustic home, lodge or cabin.	Primitive – a more distressed look that has a deep hand hewn ripple with lots of tear, chiseling on the panel edges, grooves, and on the inner edges of the stiles and rails.


• We hand-sand the doors to give a finished look, but we can also stain the doors, • All the designer doors are available with WCI stain finishes. We will require a signed stain sample with each order. • If you prefer a custom stain color, just send us a sample and we will work to match it as closely as possible. This may require an upcharge. • If a door is ordered unfinished, we highly recommend that it gets shipped directly to the finisher/painter as it is crucial that it does not sit unfinished for long periods of time. If the door remains unfinished for too long, you risk potential moisture absorption that can cause separation, and you nullify the warranty. We also highly recommend that a sealer is applied to all sides and edges of the door and jambs within 48 hours in order to maintain the warranty. •Samples shown on All Heart Redwood. Please call for other wood and stain samples.
		Unstained
		Light Stain
		Classic Mahogany Stain
		Dark Walnut Stain
		Midnight Black Stain

Wood Carvings can only be done on the following wood types: • Superior Alder • Sappele Mahogany • African Ribbon Mahogany • Chinese Elm Carving is NOT available on doors made from redwood or Reclaimed Fir. Wood carvings are priced as a separate charge in addition to the door frame and can be applied to any of the solid panel doors.

Hand Wrought Iron Grilles: • Iron gauge(s) for the 5 standard iron designs: • ½” x ½” square stock or 3/8” x 1” strap stock which hand forged and hammered to varying/ variable sizes. • The iron grilles are not powder coated. Instead, we use a clear-glaze or a wax coat finish which allows the artist’s workmanship and handhammering to show on the surface of the metal. a) Clear sealant: suggested for exterior applications, is a spray on lacquer product. b) Waxed-dipped: suggested for interior applications, is applied with a cloth and rubbed into the open pores of metal while it is still hot. When waxed metal finish fades, heating it with a blow dryer brings back the body and depth of the finish. • Powder coating is available, per request, for an upcharge and will add to the doors lead time. If the door is to be used in an outdoor application, please tell us because powder coating will become necessary to protect the metal from the elements.

back to top

Washington Carving Rio Carving Denver Carving Wilmington Carving New Yorker Carving

Wine Cellar Doors

DESIGNER COLLECTION DOORS

Carved Wood Doors