CellarPro 1800QT Cooling System
You might also like:
FeaturesCellarPro's 1800QT wine cooling unit provides outstanding performance, adjustable humidity control and super-quiet operation. Perfect for small wine cellars and residential wine cabinets located in a temperature-controlled environments, CellarPro cooling units are designed to be installed through the wall and should not be ducted unless accompanied by an in-line fan.
- Super Quiet Operation
- Electronic Thermostat
- Digital LED Display
- Adjustable Humidity Control
- Energy-Saver Mode
- Quick-Chill Mode
- Audible and Visual Alarms
- High-Output Compressor
- Electrofin Coated Coils
- Min/Max Temperature
- Maintenance-Needed Indicator
- Auto-Defrost Cycle
- Ultra-Quiet Operation (45 dBA)
- Power On/Off Switch
- Removable Steel Case
- Power Cord Exits from the Rear
- Vibration-free Operation
- 3-Amp light Receptacle
When ducting the FRONT of CellarPro VS and Split cooling units, varying amounts of condensation can occur depending on the ambient conditions where the cooling unit will be located. The charts above are designed to provide guidance in selecting the appropriate front duct kit depending on 1. Your desired cellar temperature, 2. The ambient temperature where the cooling unit will be located, and 3. the ambient relative humidity where the cooling unit will be located.
Condensation generally occurs on the cold surfaces of the face and around the front of the cooling unit when the temperature of the metal falls below the ambient dew point (a function of temperature and humidity). The greater the difference between the dew point and the metal temperature (ie the higher the dew point and the lower the metal temperature), the more condensation will occur. For this reason, CellarPro has developed two front duct kits for its VS and Split systems: a duct kit for LOW humidity conditions, and a duct kit for HIGH humidity conditions. The HIGH humidity duct kit has extra insulation around the front and face of the cooling unit, and always should be used together with our remote control display kit. In some cases (shown above in red), the humidity conditions are too high even for our HIGH humidity duct kit. In this case, the cooling unit should be moved to a conditioned space and the rear should be ducted if necessary.
- Capacity:200 Cu. Ft. -
- Size:18w x 16.5d x 10.5h (in)
- Weight:60 lb
- Shipping Dims:21l x 20w x 14h
- Shipping Weight:60 lb
- Power/Rating:115V AC / 60 Hz
- Running: 3 Amps
- Startup: 20.1 Amps
- Optional Extended Warranty
Free Design Services
Do you have a room or a designated space that you would like to transform into a wine cellar, wine storage area, or wine room?
Click design request, & share your room dimensions with us, along with some other valuable information pertaining to your wine storage needs, and we will provide you with a wine storage plan layout free of charge.
We can design a room or area for you with either our modular wine rack kits, or our custom products. We can design by budget, bottle capacity, or any other criteria.
Warranty*Special Note - CellarPro requires a completed checklist from the installing technician in order to activate the manufacturer's warranty on this equipment
1800 QTL / QT / XT / XTS: For five years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. Click here for information about our extended warranty.
1800 XT-220V: For two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
1800 XTSX, 3200 VSi/VSx, 4200 VSi/VSx: For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. Click here for information about our extended warranty.
4200VSi / VSx - 220V/50Hz: For one year from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
Split Systems: For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of original delivery, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. The warranty will not be activated until the Support and Data Service Sheet has been completed and submitted to CellarPro. The warranty period starts from the time of purchase, regardless of the time of activation.
For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.
All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.
The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident, or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.
To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.
A Turn Key quote will be required if delivery is to be made to the following:
- High rise
Any residential area where trucking companies must use an elevator
- If the customer wants delivery past the threshold & inside the residence
- If the drop off location is not directly off of the driveway or if the driveway is inaccessible.
- The Purchaser must contact Wine Cellar Innovations to inform them of the error that was made
- A replacement will be sent to the customer within 24 hours
- The Purchaser will be given an RMA# which must be written on the outside of the shipping box
- Call Tags will be sent to the Purchaser to return the item at no cost
- Instructions will be included with the Call Tags on how to return the item. This is called “Activating the Call Tag.”
- The customer has 6 business days to activate this call tag. If it is not activated by the 7th business day the customer will be charged the full amount of the product plus shipping.
- Conversely, The Purchaser may request that the replacement not be sent until the incorrect unit arrives back at Wine Cellar Innovations. This will eliminate issue #6 above…ensuring no cost will be incurred by the customer.
If you choose not to have your product shipped to you immediately when it is completed, or if you are interested in picking up your products yourself, then Wine Cellar Innovations will store your product at our warehouse at no additional charge for up to 7 calendar days from the initial date you are informed your product has been completed. On the 8th calendar day your order will start to accumulate storage fees in the amount of $.10 per pound/ per day. Your order will not be release until all payments have been received, including the additional storage charges. If the amount of your storage charges exceeds the payments that Wine Cellar Innovations has received, then product is subject to forfeiture.
4 stars (#)
3 stars (#)
2 stars (#)
1 star (#)